The benefits in a nutshell
change 5 1.25" filters with a single rotation
no time-consuming manual filter changes
suitable for all 1.25" filters
extremely light - only 254 grams
wide variety of adapters - T-2 connectors on both sides and 1.25" connectors - with a clearly perceptible click when reaching a new filter position
5 filters in a circle
Use your LRGBs or your favorite nebula filter. And you'll never have to search for your filters in the dark again. Pre-inserted into the filter wheel, your filters remain well protected and ready to use at any time.
One lap is enough
- to switch between 5 different filters. The advantage: even in the dark, you can feel it when a filter snaps into position. Also, a number between 1 and 5 shows you which filter the wheel is currently set to.
Also made for small telescopes
We didn't 'reinvent the wheel', but we did make it smaller. The filter wheel is one of the most compact we know of, measuring 85mm in diameter and weighing 254 grams. This means the filter wheel will also fit small telescopes with moderate sized mounts.
T2 ports on both sides, with adapter
T-2 connectors on both sides let you connect virtually every accessory imaginable - T-2 connectors are now standard in amateur astronomy. A T-2 to 1.25" barrel adapter and a T-2 to 1.25" eyepiece adapter are included.
Lightfast: perfect for astrophotography
No light can escape, which is very important for astrophotography. The filter wheel is completely light-tight on the inside.
included in delivery
1x filter wheel
1x external T2 to external T2 adapter, with grooved edge
1x external T2 to 1.25" adapter for eyepieces and accessories, with plastic cap
1 external T2 connector adapter to 1.25" (31.75 mm) on the telescope side, with plastic cap
1x 2.5mm hex key
|Connection (to the telescope)
|Max. number of filter slots (piece)
|Optical length (mm)
|Type of build