TS-Optics CNC aluminum tube rings for telescopes with a tube diameter of 116 mm
Stable and light metal clamps for an optimal connection between the telescope and the mount.
♦ Suitable for telescopic tubes with an outer diameter of 117 mm
♦ Best possible stability through the use of a particularly hard aluminum alloy
♦ Minimal weight load on the mount due to lightweight construction and optimized distance from the telescope to the base of the clamp
♦ Elegant and noble design with small dimensions: no space is wasted
♦ Quick and easy mounting of the tube rings on the telescope: the rings can be opened
♦ Flat bearing surfaces on both sides with five M6 internal threads each
♦ Fine felt lining: prevents scratches on the tube
€261.60
(VAT incl.)
Reference:
APCR116
Noble D = 116mm CNC tube rings with elegant design and uncompromising quality from TS Optics
A good telescope should also be attached to the mount with optimal tube rings. An elegant appearance is just as important as good technical properties. TS Optics CNC tube clamps meet these requirements.
♦ The tube is only 8mm from the bottom of the rings. This means that the mount is not additionally loaded with unnecessarily long levers.
♦ The clamps have flat contact surfaces on both sides, each with 5x M6 internal thread. This allows you to attach dovetail bars and accessories stably and securely.
♦ The clamps are only 5 mm thick and yet very stable.
♦ A thin felt cover is placed on the inside of the clamps. This prevents scratches on the tube. However, the telescope tube is held very securely in the clamps and does not move. This is important if a guide scope is attached to the clamps.
Especificaciones:
| Inner diameter: | 116 mm |
| Material: | aluminium |
| Support surfaces: | plane surfaces on top and bottom with 5x M6 thread (female) on every support surface |
| Distance of the threads: | 1x M6 thread in the middle - 2x M6 threads at a distance of 19 mm from the middle - 2x M6 threads at a distance of 30 mm from the middle |
| Width/depth of the rings: | 20 mm |
| Thickness in the middle of the plane support surfaces: | 9 mm |
English GB
Español