TS-Optics CNC aluminum tube rings for telescopes with a diameter of 105 mm
Stable and lightweight folding metal clamps for optimal connection between telescope and mount.
♦ Suitable for telescopic tubes with an outer diameter of 105 mm
♦ Elegant and classy design
♦ Quick and easy mounting of the tube rings on the telescope
♦ Top and bottom flat contact surfaces, each with 5 M6 internal threads
♦ Felt lining on the inside prevents scratches on the tube
€237.60
(VAT incl.)
Reference:
APCR105
Noble CNC tube rings in elegant design and uncompromising quality from TS Optics
A good telescope should also be attached to the mount with optimal tube rings. A beautiful appearance is just as important as good technical properties. TS Optics CNC tube clamps meet these requirements.
♦ The tube is attached to the bracket or dovetail using a large, flat surface.
♦ Pipe clamps have an identical contact surface on top, allowing for the adaptation of dovetail clamps or other mounting rail.
♦ The clamps can be opened. The telescope can be removed from the clamps in seconds.
♦ A thin felt cover is placed on the inside of the clamps. This prevents scratches on the tube. However, the telescope tube is held very securely in the clamps and does not move. This is important if a guide scope is attached to the clamps.
Especificaciones:
| Inner diameter: | 105 mm |
| Material: | aluminum, black anodized |
| Support surfaces: | Flat bearing surfaces |
| Thread: | 5x M6 female thread - 1x centrically, 4x with distance each 30 mm from the center |
| Thickness of clamps: | 23 mm |
| Weight: | 675 gram |
English GB
Español