×

TS-Optics adapter for ocular projection and focal photography - 2" connection

This variable projection adapter is designed for 2" focusers, even accepts wider 1.25" eyepieces and can also be used as a focal adapter.

♦ Adapter for eyepiece projection and focal photography

♦ Intended for 2" focusers

♦ Suitable for 1.25" eyepieces with a large diameter up to 45mm - soft compression ring

♦ Camera connection via T2

♦ Modular consisting of three individual adapters - can be used individually

€82.60
Entrega entre 8 y 10 días laborables
Entrega entre 8 y 10 días laborables
Reference:
TSVPA2
Description

TS-Optics adapter for ocular projection and focal photography - 2" connection

The Deluxe Focal and Projection Adapter is a very high quality solution for all telescopes with a 2" connection.

It also accepts 1.25" eyepieces with a large diameter up to 45mm, such as Super Plössls with a 32mm focal length or wide angle eyepieces. These eyepieces are too thick for other projection adapters.

The advantages of the TS VPA 2:

♦ Many 1.25" eyepieces can be used, especially those with slightly larger diameters.

♦ The T2 connector can be moved, this allows the projection distance to be changed and therefore a "zoom effect".

♦ The eyepieces are held in place by a ring clamp with 2 screws, which prevents tilting.

♦ Components can also be used individually.

Components of the adapter, shown in the second image:

♦ 2" to 1.25" adapter with attached T2 thread and compression ring - eyepiece adapter

♦ T2 to 2" Adapter with Heavy Duty Compression Ring – Allows you to connect 2" accessories to T2

♦ 2" to T2 adapter to use T2 accessories on 2" focusers - 2" focal adapter

Note: The 2"-T2 adapter has a plain plug without a lock slot, which differs from the pictures.

Mounting the projection adapter, see figure 3 for the order of the individual parts:

♦ Step 1:

Screw the T2-2" adapter (image 2, center) onto the 2"-1.25"-T2 adapter (eyepiece adapter, image 2 left). The result then corresponds to image 4.

♦ Step 2:

Insert the projection eyepiece and fix it with the two eyepiece adapter screws. The result then corresponds to Figure 5.

♦ Step 3:

Slide the 2"-T2 adapter (focal adapter, picture 2 right) over the eyepiece and hold the adapter at the desired distance with the T2-2" adapter. The result then corresponds to Figure 6.

Teleskop-Service tips

Work with cameras without lens:

The greater the distance between the projection eyepiece and the camera and the shorter the focal length of the eyepiece, the larger the image. Too close a distance should be avoided. Shadowing could occur at the edge of the image field and the image tends to worsen. Recommended eyepiece focal lengths: 9mm to 15mm.

Work with cameras with lenses (for example, digital cameras):

The camera lens should be as close as possible to the eyepiece lens. That brings a valuable field of vision. Eyepieces with a particularly large eyepiece lens and long eye relief should be used. We will be happy to provide you with information on particularly recommended eyepieces.

Tip for using the eyepiece:

If you have an eyepiece with a rubber eyepiece, it's worth removing the rubber eyepiece so you can fit the T2 adapter even more easily.

1. Adaptation: 2" barrel to 1.25" receptacle and male T2 thread - eyepiece holder
2. Adaptation: T2 female thread to 2" receptacle
3. Adaptation: 2" barrel to T2 male thread - focal adapter
Telescope connection as projection adapter: 2" barrel
Camera connection as projection adapter: T2 thread (male)
Barrel size projection eyepiece: 1.25"
Maximum eyepiece diameter: 45 mm
Projection distance: variable

What´s included in the bos:

♦ Helical Focuser with 2 locking screws

Product Details
TSVPA2
Reviews
No comments

Menu

Share

QR code

Settings