TS-Optics CNC aluminum tube rings for telescopes with a diameter of 235 mm
Light and stable metal tube rings for optimal connection of the telescope to the mount
♦ Suitable for tubes with an outer diameter of 235 mm
♦ Best possible stability through the use of a particularly hard aluminum alloy
♦ Minimal weight load of the mount through lightweight construction and optimized distance from telescope to ring base
♦ Elegant and classy design in slim dimensions - no space wasted
♦ Quick and easy fixing of the rings to the tube
♦ Flat bearing surfaces on both sides with 3 M6 female threads on each surface
♦ Fine felt lining on the inside: will not scratch the tube
€453.60
(VAT incl.)
Reference:
TSCR235
Classy CNC tube rings with elegant design and unmatched quality from TS Optics
A beautiful telescope should also be attached to the mount with perfect tube rings. Here, a beautiful appearance is just as in demand as good technical properties. TS Optics CNC tube rings meet these requirements.
♦ The tube has a distance of only 10 mm to the lower side of the rings, so the mount is not additionally burdened with unnecessarily long levers.
♦ The tubes have flat bearing surfaces on both sides with three M6 female threads on each side. With this, you can attach dovetail bars and accessories solidly and securely.
♦ At only 20mm thick, the rings are lightweight yet very stable
♦ A thin layer of felt was placed inside the tube rings to prevent scratches. However, the tube holds very well in the rings and does not change position. That is important if a guide telescope is attached to the rings.
Especificaciones:
| Inner diameter: | 235 mm |
| Material: | aluminium |
| Support surfaces: | plane surfaces on top and bottom with 3x M6 thread (female) on every support surface |
| Distance of the threads: | 1x M6 thread in the middle - 2x M6 threads at a distance of 12.5 mm from the middle |
| Thickness of the rings: | 20 mm |
English GB
Español