TS-Optics adapter with M54x0.75 male and M48x0.75 female thread - 1mm short
The special adapter allows to connect correctors such as TSGPU or Baader MPCC to focusers with female thread M54x0.75
♦ Internal continuous thread: M48x0.75 - Filter thread 2" (female) - length 3 mm
♦ External thread: M54x0.75 photo thread (male) - length 2 mm
♦ Optically effective total length: only 1 mm (bar thickness)
♦ the short adapter fits the connection thread M48x0.75 of many offsets
♦ Suitable for focusers with internal thread M54x0.75, such as UNCN2-G2. Additional adapters can also be used to fit M63 or M68.
€203.76
(VAT incl.)
Entrega entre 8 y 10 días laborables
Reference:
M54a-M48i
TS-Optics short adapter from M54x0.75 to M48x0.75 for photography
This adapter is a solution for all astrophotographers who want to screw the corrector to the focuser and not clamp it. With a length of just 3mm, the adapter is extremely short. The adapter fits the internal thread M54x0.75 of 2" focusers, such as the UNCN2-G2 Newtonian focuser.
Baader MPCC and TSGPU Newtonian comma corrector connection:
These brackets feature an additional M48 thread for screw adaptations. Remove the M48 ring from the offset and replace it with this adapter. This does not change the working distances. Now you can screw the correctors to the focuser.
Connection of other correctors with M48 camera thread:
The prerequisite is that the corrector has an M48 thread with a length of at least 5 mm. Screw the adapter M54a-M48i into the M48 thread. Note that the concealer's working distance is now reduced by 3mm. 55mm converts to a 52mm working distance to the sensor.
| Internal thread: | M48x0.75 - 2" filter thread - length 3 mm |
| External thread: | M54x0.75 photo thread - length 2 mm |
| Optically effective overall length without M54 thread: | 1 mm |
| Optically effective overall length with M54 thread: | 3 mm |
| Adapter diameter: | 58 mm |
What goes in the box:
♦ TS Optics Adapter
English GB
Español