Omegon 1.25'' Newton alignment laser with viewing window

The advantages at a glance:

Precise and economical alignment laser for Newtonian telescopes

The telescope can also be adjusted by one person.

1.25'' barrel

45° adjustment disc

step by step guide

start immediately: with CR2032 3V battery

Adjustment also possible alone: ​​45° with window

Are there always two of you when you watch? If not, take advantage of the plane and the 45° window. This allows you to do the adjustment entirely on your own. You can also see everything from the main mirror and know when the correct adjustment has been made.

This adjustment tool can be used on any 1.25" focuser.

This means that the collimator can be used in any modern telescope. Activate the red laser diode with a rotary switch. Although it has a brightness of <5mW, under no circumstances should you look at it directly.

With step by step instructions

Attention beginners: with the laser you also receive simple instructions for adjusting your telescope. Here you will learn step by step how to proceed to observe with an optimally adjusted telescope.

Also built for the future

The laser is already adjusted, but you can adjust it yourself if necessary. For this, it has three adjustment openings offset by 120° and initially sealed. The laser battery can be changed at any time. All you have to do is unscrew the small swivel cap on the rear end of the laser.

Always get the most out of your telescope. With this laser you can align your Newtonian telescope in just a few minutes!

Especificaciones:

Capacidad
Conexión (lado de telescopio)	1,25"
En general
Tipo	Accesorios de alineación
Tipo de construcción	Punteros láser