TS-Optics rotation and transition adapter from M63x1 to M68x1 and M54x0.75
Screw your accessories to your focuser for better stability and use the 360° rotation for the best possible camera orientation.
The CAA adapter has an M63x1 external thread on the telescope side, it fits, among other things:
♦ TS PhotoLine Apos with 2.5" R&P focusers
♦ TS 2.5" rack and pinion extractor RPA82
♦ TS 2.5" rack and pinion focuser TSFOCR25 and TSFOCR25S
♦ With the TS Adapter M68a-M63i you can also adapt the CAA to focusers with the M68 connection thread.
The CAA adapter has an M68x1 and an M54x0.75 internal thread on the camera side, enabling the screwed connection of:
♦ TSRED279 2" 0.79x reducer and corrector for apos - the reducer has an M54x0.75 external thread
♦ TSRED379 3" 0.79x reducer and corrector for apos - the reducer has an M68x1 external thread
♦ TSFLAT2.5 TS full format APO field corrector
♦ You can also use the TS Adapter M68a-M63i to adapt the Riccardi Reducer RIRED-M63 to the CAA.
The CAA adapter also has a 2" receptacle with compression ring:
If you don't want to have a screwed adaptation, you can also use 2" accessories directly. The adapter with ring clamp and three clamping screws is included in the scope of delivery.
|Connection at telescope side:
||M63x1 thread (male) - length 7.5 mm
||360° rotation with locking screw
|Connection at camera side:
||M68x1 thread (female), M54x0.75 thread (female) and 2" receptacle with compression ring
|Length to the M68 thread:
||21 mm (the male M63x1 thread is not taken into account)
|Length to the M54 thread:
||26 mm (the male M63x1 thread is not taken into account)
|Length to the 2" receptacle:
||38.5 mm (the male M63x1 thread is not taken into account)
♦ CAA rotation adapter M63 to M68
♦ Reduction adapter M68 to M54
♦ Reduction adapter M54 to 2"