Omegon 1.25" Filter Wheel - Change your filter in seconds
This 1.25" filter wheel allows you to use up to 9 different filters and change them in a couple of seconds, your filters will always be ready to use, whether for photography or visual observation. Use the filter wheel with UHC, OII, CLS and other filters, for example: this will allow you to quickly and easily find the best filter when you look at it visually.
Space for up to 9 filters, which are also well protected
Open the filter wheel and screw up to 9 different filters into it. These can be RGB and luminance filters for astrophotography or broadband and narrowband filters for visual observation. You can also leave the filters mounted on the filter wheel, where they are optimally protected from dust and damage.
Simply twist to change filter
Imagine you have a camera mounted on your telescope and you have to switch between different filters as fast as possible. This is only possible with a filter wheel. The practical rotary wheel offers you an incredibly fast change between up to 9 different filters. Each filter position is designated by a number, so you know which filter is currently in the beam path.
T-2 connector on both sides
The telescope side of the filter wheel comes with a 1.25" adapter, allowing you to quickly and easily attach it to your focuser. The filter wheel also has a T-2 thread on the telescope side for other adapters On the accessory side, you will also find a T-2 thread, here you can connect your camera or eyepiece connector.
Protected against stray light
The inside of the filter wheel is absolutely light-tight, allowing you to get images without reflections or ghosting.
The advantages in a nutshell:
filter wheel with space for up to nine 1.25" filters
once mounted, filters can be changed in seconds
accepts any standard 1.25" filter
filter positions indicated by numbers 1-9
T-2 connector on the side of the telescope and 1.25"
accessory side T-2 thread
Specifications: