Stable and lightweight folding metal clamps for optimal connection between telescope and mount.
♦ Suitable for telescopic tubes with an outer diameter of 90 mm
♦ Elegant and classy design
♦ Quick and easy mounting of the tube rings on the telescope
♦ Level bearing surfaces at top and bottom, each with three M6 internal threads
♦ Felt lining on the inside prevents scratches on the tube
Noble CNC tube rings in elegant design and uncompromising quality from TS Optics
A good telescope should also be attached to the mount with optimal tube rings. A beautiful appearance is just as important as good technical properties. TS Optics CNC tube clamps meet these requirements.
♦ The tube is attached to the bracket or dovetail using a large, flat surface.
♦ Pipe clamps have an identical contact surface on top, allowing attachment of dovetail clamps or other mounting rail.
♦ The clamps can be opened. The telescope can be removed from the clamps in seconds.
♦ A thin felt cover is placed on the inside of the clamps. This prevents scratches on the tube. However, the telescope tube is held very securely in the clamps and does not move. This is important if a guide scope is attached to the clamps.
| Inner diameter: | 90 mm |
| Material: | Aluminium, black anodized |
| Support surfaces: | Flat support surfaces with 50 mm width |
| Threads: | 3x M6 thread (female) on top and bottom - 1x centred, 2x with 15 mm distance to the middle |
| Thickness of the clamps: | 20 mm |
Please sign in first.
Sign in