Adapter accepts 2" filters, allows quick attachment and 360° rotation, and fits from M48x0.75 to EOS bayonet, with overall length just 20mm
♦ Telescopic side connection thread - Internal thread M48x0.75
♦ Connection camera side: EOS bayonet (male) suitable for Canon EOS cameras
♦ Connection adapter has a 2" filter thread (M48x.75) internal thread to accommodate 2" filters
♦ All standard 2" filters can be used on plugs
♦ The adapter is self-centering and the adapter cannot come loose due to the ring-shaped groove
♦ Overall length only 20mm
TS 360° rotation system, 2" filter holder and EOS bayonet quick coupling
This adapter is a universal talent, solving several challenges at once and with a length of only 20 mm. Below are some of the possible applications. This rotation adapter was developed for you out of practice, by amateur astronomers for amateur astronomers.
♦ Adaptation of M48x0.75 to Canon EOS - with this you can, for example, connect your Canon EOS DSLR directly and have the important M48x0.75 thread on the telescope side.
♦ 360° rotation: this allows you to determine the section of the image; when you clamp the adapter, it automatically centers itself in the tapered slot. Tilt is excluded.
♦ Quick Disconnect: You can disconnect the camera from the telescope in seconds, for example to change the batteries. Camera cables don't get tangled, no need to untwist them.
♦ 2" filter holder - connection adapter offers a 2" filter thread. There is enough space on the adapter for all filter holders, including the slightly taller ones
♦ Camera Dust Protection: The front connector can also stay on the camera, and the filter protects the inside of the camera from dust.
♦ Only 20mm short - With the Canon EOS, this results in a 65mm back focus from the adapter's M48 thread.
♦ We also offer connecting pieces with other sizes for the adapter, so that the rotation adapter can grow with your accessories.
| Thread telescope side: | M48x0.75 female thread length 3.5 mm |
| Camera side: | Canon EOS mount |
| Filter thread: | 2" filter thread - female thread |
| Length of the adapter: | 20 mm |
| Diameter of the adapter: | 60 mm without knurled screws |
What´s included in the bos:
♦ Helical Focuser with 2 locking screws
Please sign in first.
Sign in