S-Optics to M90x1 adapter for Skywatcher refractors to adapt a high quality focuser
The adapter allows, among other things, the connection of the 2.5" TSFOCR25 and TSFOCR25S and all Skywatcher refractor telescopes from 80 mm aperture.
♦ Suitable for all Skywatcher refractor telescopes (achromatic and ED) from 80mm aperture
♦ Suitable for all Skywatcher refractors with an inner diameter of 96mm to 97mm, either directly on the tube or via the reduction adapter on the tube
♦ Fixation by means of three screws on the tube (screws are not included in the scope of supply)
♦ Focuser connection: External thread M90x1, suitable for the internal thread of the focuser
Connection adapter for tubes with inner diameter D=96-97 mm for TS 2.5" focusers FOCR25
Replace the original focuser on your Skywatcher refractor with the high quality TS-Optics 2.5" RAP focuser or another focuser with an internal M90x1 thread on the side of the telescope.
The adapter is primarily designed for all Skywatcher refractor telescopes with an aperture of 80mm or more. The adapter fits directly onto the 80mm ED refractor tube. The larger refractors have a reduction in the tube. The adapter then fits into this reduction. The adapter has a dovetail ring on the focuser side, suitable for the dovetail ring of the focuser.
By attaching the focuser, your Skywatcher refractor is ready for astrophotography. In addition to the 1.25" and 2" barrel, the 2.5" RAP focusers also have an internal M63x1 thread for screwing on correctors. The focusers also have a viewfinder shoe that can hold your viewfinder.
| Connection telescope side: | 96 mm outer diameter with 3x M4 female thread (120° offset) |
| Distance of the female thread from the stop edge of the adapter: | 7.5 mm |
| Eyepiece focuser connection: | M90x1 male thread length 5mm |
| Optically effective length: | 5mm only |
What goes in the box:
♦ TS Optics Adapter
English GB
Español