TS-Optics adapter from M60 Vixen thread to M48x0.75 thread
Adapter allows connection of M48 accessories to Vixen M60x0.75 internally threaded focusers and correctors
♦ Connection thread on the telescope side: male thread M60x0.75 and female thread M48x0.75
♦ Camera side connection thread: External thread M48x0.75
♦ The adapter allows to connect cameras, adapters and photographic accessories to Vixen correctors and focusers with internal thread M60x0.75
♦ Total optically effective length (without the two external threads): 3 mm
€189.60
(VAT incl.)
Entrega entre 8 y 10 días laborables
Reference:
60834
Vixen M60 thread adapter to 2" filter thread (M48x0.75) with 2" filter thread connection
The adapter fits directly onto the internal M60x0.75 thread of Vixen offsets, field flatteners and reducers. The short adapter allows the connection of any accessory to these components and also offers a screw thread for 2" filters. With a length of only 3mm, the adapter still leaves enough room for additional parts such as off-axis guides or filters. drawers.
Focal adapter for telescopes with female thread M60x0.75 on the focuser:
The adapter is suitable for all telescopes whose focuser has an internal M60 thread. This adapter allows for an extremely short adaptation to the M48 external thread and at the same time offers a 2" filter connection thread. The adapter thus allows cameras to achieve focus while using 2" nebula filters at the same time. .
The adapter is suitable for the following telescopes:
♦ Celestron Newtonian 2" rack and pinion focusing telescopes
♦ Vixen Newtonian Rack and Pinion Focuser and Refractor Telescopes
♦ Synta (Skywatcher) Newtonian and Dobsonian telescopes with rack and pinion focusing system
♦ GSO and ICS Newtonian and Dobsonian telescopes with rack and pinion focusing system
Teleskop-Service Tip
Newtonian telescopes with an aperture ratio of 1:5 or faster require a coma corrector to achieve optimal image quality in the field. With the 2" adaptations of the original excerpts, you have no way to achieve focus with the comma corrector. TS also has a solution for this. The typical comma corrector ends with the T2 thread. We offer a transition to the 2nd "- Filter adapter thread at T2. This means that the coma corrector completely disappears into the draw tube, so it doesn't look bulky. This allows you to fully utilize the field correction effect of the comma corrector.
| Thread at the telescope side: | M60x0.75 male thread - length 4 mm |
| Filter threads at the telescope side: | M48x0.75 (2" filter thread) female |
| Thread at the camera side: | M48x0.75 male thread - length 3 mm |
| Optical path (without the two male threads): | 3 mm |
What goes in the box:
♦ TS Optics Adapter
English GB
Español