The advantages at a glance:
2" Ball Bearing Focuser: Optimize your telescope with a more precise focuser for observing and photography
Easy focus: so that in the future you hit the sharp point and do not go over the mark.
1:10 reduction because you focus ten times more precisely.
Load capacity of 2 kilos: Stability for your camera and all your accessories
1:10 reduction: The trick with fine gears
Moon, planets, nebulae - they all have to be in focus first. An important task, especially at high magnifications or for astrophotography. With the 1:10 reduction, this is child's play. Focus roughly with the normal focus wheel and then switch to fine adjustment. This simple method gives you beautifully sharp images.
For the camera and each eyepiece
Attach accessories up to 2 kg in weight. Even the heaviest eyepieces and many cameras are reliably transported. And you can also fix the focus at any time with a locking screw if you don't want it to drift out of position.
The focuser is made entirely of metal.
78mm hole diameter connector
35mm adjustment range (46mm with extension sleeve): more focus reserve than many other focusers
Height: 69mm to 2" adapter
Incl. 2" to 1.25" adapter with filter thread
2" or 1.25" accessories: Everything you need
The 2" Crayford focuser has a spring-loaded ring clamp, with which it holds eyepieces and adapters flat. This ensures a firm hold and smooth handling of your accessories. A 2" to 1.25" reduction adapter Fits all 1.25" eyepieces on the screw in 2" filters.
This is how the exchange succeeds in your newtonian telescope
So that you too can fix your new focuser, you only need two more adapters: the tube adapter (art. no. 33360), with holes 86 mm horizontally and 83 mm vertically, the reducer adapter from 80 mm to 78 mm (item no. 51120)
Upgrade your telescope with an Omegon Crayford Focuser!
|Funciona por motor
||Tubo telescópico del ocular
|Tipo de construcción