The adapter fits directly into the M80 thread of the TS 3" flattener and offers a short adaptation to the M69x1 thread.
♦ Flattener side connection: internal thread M80x1
♦ Camera side connection: Internal thread M69x1
♦ Effective length: 13mm
♦ Optimum distance from the M69 thread to the focus: 93 mm
Adapter TS to internal thread M69x1 for Teleskop-Service 3" large refractor flattener
The adapter fits directly into the M80 thread of the 3" TS flattener and offers a short adaptation to the M69x1 thread. This allows you to connect CCD cameras with a long path length, filter wheels, off-axis guides and similar accessories. The TS The 2.5" off-axis guide TSG-OAG is especially suitable. Therefore, it is very practical that you can screw this adapter directly to the OAG.
If you are not working with off-axis guidance, you can screw the adapter to M48 (M69-M48) directly to this transition adapter.
The optimal distance from the flattener's M80 thread to the focus:*
The optimum distance from the start of the M80 thread on the flattener to the focus is 106mm. The adapter itself is 13mm long. So you still have 93mm from the M69x1 internal thread to the optimal focus position.
This is possible because the adapter is built as short as possible: the internal thread M69x1, for example, is only 5 mm long.
| Connection at flattener side: | M80x1 female thread |
| Connection at camera side: | M69x1 female thread |
| Length M69 thread: | 5 mm |
| Effective length: | 13 mm |
| Optimum distance from M69 thread to focus: | 93 mm |
What goes in the box:
♦ TS Optics Adapter
Please sign in first.
Sign in